Saber Class

United Federation of Planets: Starfleet Division

Saber Class

Fast Frigate
Accommodation
60 (15 Officers, 45 Enlisted Crew)
Classification
Fast Frigate [Diplomatic, Science, Scout, Patrol]
Funding
Advanced Starship Design Bureau; United Federation of Planets Defense Council
Development Project Started
2336
Production Start Date
2358
Production End Date
Still in production
Current Status
In Service
Locations of Construction
Utopia Planitia Fleet Yard, Mars Copernicus Fleet Yard, Luna San Francisco Fleet Yards, Earth Avondale Production Facility, Rigel II Seskon Trella, Tellar
Current Starships
U.S.S. Nighthawk - NCC-79273
Former Starships
U.S.S. Shrike - NCC-79812

1.0 Introduction

1.1Mission Objectives

Starfleet Exploration Directive 911.3, Starfleet Defense Directives 114.9 and 154.7, Starfleet Borg Defense Initiative Directive 371.6 and Federation Security Council General Policy together define the following objectives for the Saber-class starship:

  • Act as a mobile platform for defensive, diplomatic or scientific projects of many kinds.
  • Back up the Oberth and Miranda classes on certain specific missions, serving the Federation in deep-space exploration, science or defense.
  • Carry out the Federation's defensive, cultural, scientific and exploration policy on its own in deep space or in border regions.
  • Support Starfleet's primary assets on the front line in wartime and during emergencies.
  • Serve as a mobile test bed for trialling and introducing new or mission-specific technology of any kind.

1.2Design Statistics

Length190 meters
Width193.19 meters
Height48.60 meters
Weight2,756,000 metric tons
Cargo Capacity9,954 metric tons
HullDuranium-tritanium composite with micro-fiber reinforced ablative armor over critical compartments
Number of Decks10 total, 9 habitable

1.3General Overview

The Saber class entered service in 2358. It was built to take over from the ageing Oberth-class science and scout ships and to act as an escort and police vessel for the Federation's internal security. From the outset it was conceived as a companion to the Steamrunner-class light cruiser: when the two classes operate together, each covers the other's weaknesses and supports its work.

Its onboard facilities are modest, so long-duration missions generally lie outside its brief. For assignments inside Federation space, or for clearly defined deep-space tasks, the Saber has shown itself to be a highly capable ship.

Compact, quick, agile and heavily armed for its size, the class has also earned a reputation in the defensive role. Numerous Sabers fought in the defense of the Sol system during the Second Borg Incursion and in the war against the Cardassian/Dominion alliance. Though never intended as a dedicated warship, the Saber stood its ground and became a valued asset to Starfleet and the Federation.

1.4Construction History

In 2336 the United Federation of Planets called for proposals for a new multi-role vessel to succeed the ageing Miranda and Oberth classes. Research and development groups submitted more than ten designs. Several were chosen for prototype construction and evaluation, among them the Norway, Steamrunner and Saber classes, and each was given its own construction yard and development team in the hope of building and fielding it quickly.

Before work on the Saber prototype could begin, Starfleet's "Master Plan for the Fleet" changed course fundamentally. Research and development resources were turned toward larger multi-mission ships at the expense of smaller, mission-specific types, and Starfleet did not take up its smaller designs again until the late 2340s.

When interest revived, the frigate plans were brought out of storage and re-examined. After a minor redesign, the Avondale Production Facility on Rigel II started work in 2354 on the prototype hull, which carried the designation NX-60500. Building the basic hull and nacelles took 8 months, and the primary computer core went in during January 2355.

A Ceries Industries B-grade M/ARA was selected as the main power source. It was installed without difficulty, and the ship was generating its own power within 2 weeks of the warp core's arrival. The impulse engines and reaction thrusters followed; faulty fusion reactor cores cost the programme only one week.

Initial construction was finished in late 2355. The newly named USS Saber was taken to the Avondale testing grounds for impulse stress trials and passed them with very high efficiency scores. Back at the Avondale Production Facility the internal compartments were quickly completed, and on March 5, 2356 the Saber departed Rigel II on her shakedown cruise.

The USS Saber, NCC-60500, was formally commissioned at a ceremony above Earth on December 6, 2356. Starfleet commended both the R&D team and the yard crews for the speed with which they had developed and built a new class of starship.

The class has been built in large numbers ever since. It is not a glamorous ship, but it carries out whatever it is given with great skill and reliability. Its service record shows some of the lowest rates of engineering trouble in Starfleet, and warp field efficiencies among the fleet's best. Even after the newer Intrepid class displaced its partner, the Steamrunner class, from its role, the Saber stayed in service.

Safety was always a consideration, but only after the discovery of the Dominion did Starfleet think seriously about strengthening the Saber. When the Steamrunner went into a refit cycle, Starfleet chose to give selected Saber variants heavier offensive and defensive capabilities at the same time. The Patrol and Scout variants were reworked to accept 2nd generation torpedo launchers and new Type X phaser arrays, and also received new shield grids, avionics upgrades, general engineering redesigns and replacement computer cores. The resulting 'new' Saber, designated FFU, became a formidable defensive platform.

Through the Dominion War and the 2nd Borg Incursion that followed it, the Saber kept earning praise for its toughness and engineering strength. The design has proved so sound that production continues, with registries now in the 79000s, and new Sabers leave the yards at a surprisingly steady rate.

A number of small changes have since been added to the Saber refit specification, among them EMH technology in sickbay. Every Scout and Patrol variant now in production is built as an FFU.

2.0 Command Systems

2.1Main Bridge

General Overview

Primary operational control of the ship rests with the Main Bridge, on Deck 1 at the top of the primary hull. All primary missions are supervised directly from here, and the work of every department is coordinated through it.

Entry is strictly limited to personnel holding Level 4 security clearance (officers of Ensign rank and above) and to authorized bridge staff. Every bridge officer has access to a Type I or Type II phaser.

The bridge is an exchangeable module, so it can be swapped to suit a wider range of mission parameters.

Layout

The bridge uses a proven primary configuration that later designs, the Defiant class among them, went on to adopt. The Captain's chair, Tactical, Operations and Engineering stand on a raised section. The centre of the bridge holds the Captain's seating and information displays, and the Captain's chair carries fully programmable consoles that can be set up for many purposes.

The Tactical/Security station, made up of one tactical console and one security console, stands to the left of the Captain's chair. Use of the tactical console is tightly controlled: only personnel with Level 4 Tactical clearance may operate it, and even they must enter special codes before they can reach the vast computer links that give Tactical almost unlimited information. Before granting full access, the console's security subsystem can put the user through a series of thermal, biological, retinal and vocal scans; a user who clears every one of them is given full control of the ship's offensive and defensive systems.

The Operations manager's console sits on the Captain's right. It matches the Tactical/Security station in size and design, but is placed nearer the bridge engineering station than the front of the bridge. Because so much sensitive information passes through it, the Operations panel is protected by security protocols as strict as those on the tactical consoles. The Mission Operations console, used during away team missions, stands directly behind the Ship Operations console.

Also on the platform, against the bridge's aft wall, is a large master systems display like the one in Main Engineering. Damage, power distribution and all other relevant ship data appear on its cutaway image of the ship. Beneath the MSD is a large engineering console combining Eng I and Eng II. Its own smaller cutaway diagram shows every engineering reading, warp fields and engine output included. The console holds priority links to the navigational deflectors, the Inertial Damping Field (IDF), the Structural Integrity Field (SIF), the Reaction Control System (RCS) thrusters, the Impulse Propulsion System (IPS), the Warp Propulsion System (WPS) and the computers.

These consoles are normally unmanned, but the Chief Engineer can bring them to full Enable mode with voice codes and a retinal scan. Engineering II can be programmed freely to stand in for any secondary console, whether Security, Operations, Medical, Sciences or limited Helm control.

The Flight Control Officer sits directly ahead of the command area, facing the main viewer, at a console that curves through nearly 180 degrees. It has priority links to the navigational sensors and deflectors and to the warp, impulse and thruster propulsion systems. It is tied into engineering monitors and controls as well, among them the hull integrity monitor, the structural stress monitors, the SIF and the IDF, and it gives access to the tractor beam controls.

A large viewscreen fills the front of the bridge. It handles every function expected of it, from communications to magnified visual scans of nearby objects.

Ahead of the raised command section, along the port bulkhead, stand the Science consoles and other stations that can be programmed for many functions. Two of these are Science consoles. The primary one, Science I, enjoys priority access to the main computer and every sensor and probe, and is also linked to Tactical, Operations and Flight Control.

Science II belongs to the ASO (Assistant Science Officer) but may be used by anyone. It reaches all science, navigational, sensor and communications systems. It can be set to work alongside Science I, though security links and all non-science data are kept from it, and it normally operates on its own.

The Executive Officer's console stands against the starboard bulkhead, forward of the Captain's chair. It has priority links to nearly every ship function and holds the hand-input sub-console used to set the auto-destruct system.

Setting the auto-destruct is governed by standard Starfleet security procedures, which can be reached through any secured Memory Alpha ODN connection.

Two turbolifts serve the bridge for normal travel around the ship, and an emergency ladder leads down to Deck 2. A single door at the rear of the raised section opens into the Captain's Ready Room, which lies directly aft of the bridge.

No escape pods are attached to the bridge; the pods are on Decks 3 to 6. Two pods on Deck 3 are set aside for the four most senior officers in the chain of command, who are the last to leave the ship. Since experienced Captains are becoming scarce, Starfleet has done away with the tradition of a Captain going down with the ship. In an abandon-ship situation the four senior officers wait until everyone else has left, arm the auto-destruct if they judge it necessary, and then depart in the two reserved pods.

2.2Main Engineering

Main Engineering, on Deck 1, is the heart of the ship just as the bridge is its brain. It can reach almost every system aboard and is responsible for repairs, power flow and general maintenance.

The Chief Engineer's office lies to starboard of Main Engineering. It is fitted with a small replicator, a diagnostics table, equipment for assembly and repairs, a personal console with its own private viewscreen, and a private bathroom.

The primary engineering spaces are entered through two large blast doors, one pair on each of Decks 1 and 2. They can be shut for internal or external security reasons or during emergencies.

Just past the Deck 1 doors is an observation area where technicians watch over the ship's systems. It also holds a floor-mounted situation display, a counterpart to the bridge's Master Systems Display, nicknamed the 'pool table', which lets the Chief Engineer take in the overall situation at a glance.

Deeper inside lie the main control systems and 'the pit', an opening in Deck 1 through which engineering staff look down on the warp core on Deck 2. The Saber is one of only a few classes whose core runs horizontally along the ship's centreline, and the core can be ejected through the stern if that is needed to prevent a breach.

The room is circular but laid out tightly to save internal volume. Working consoles cover every usable surface around its circumference and give engineers and technicians primary control access. Numerous ladders and access panels lead into the Jefferies tubes that run throughout the ship; the ship's technical complexity makes these crawlspaces essential for keeping systems at peak efficiency and carrying out proper repairs.

The Matter/Anti-Matter Assembly (M/ARA) is on Deck 2. The ship's primary power is produced inside its Matter/Anti-Matter Reaction Chamber (M/ARC), which is inspected regularly because of its importance. Access to the core is restricted; a forward port leads to the dilithium matrix and a side port to the warp plasma conduits.

The M/ARA's fuels, deuterium and antimatter, are kept in storage pods on Deck 7 and piped from there to the warp core intake valves. Both fuels can be ejected through the stern.

2.3Security Department

The Security Department is a multi-room complex in a restricted area of Deck 5. From it open the ship's armory, the auxiliary weapon control room, the brig and the phaser range, and it also houses the office of the Chief Tactical Officer.

That office, beside the brig, is decorated as its occupant prefers. It is equipped with a replicator, a computer display, a personal viewscreen, a work area and a washroom/head.

Brig

The brig, on Deck 5, is a restricted area that can only be entered from inside the Security department. The Saber class has 2 cells, each for two occupants, fitted with beds, a toilet, a water dispenser, and chairs at a retractable table. Each cell doorway has its own built-in level-10 forcefield emitter.

Internal Forcefields

Forcefields can be raised anywhere in the ship from the Deck 5 Security office or from the bridge, closing off stretches of corridor from the rest of the vessel.

Internal Sensors

Internal sensors watch over shipboard security. They can locate any crew member who is wearing a commbadge, and when the Tactical officer enters specific variables they can establish the general position of anyone aboard.

Phaser Range

The phaser range on Deck 5 is heavily shielded and has armored walls. It is designed for low-power phaser fire but can take brief blasts at setting 16 without trouble.

Security uses the range to train the crew in marksmanship. For training, the range's holo-emitters create a holographic environment in the manner of a holodeck. Personnel are sent in alone or as an away team to work through the setting, while the supervising security officer records how each person takes cover, returns fire, protects the others and copes with a range of other scenarios. Every crew member is tested in phaser marksmanship every six months.

Marksmanship is graded in 25 levels. All personnel are trained to level 14 on Type I and Type II phasers. Security personnel must hold level 17 with every phaser type, and a true marksman keeps a hit ratio of at least 80% at level 23.

Ship's Armory

The armory is in a restricted area of Deck 5 and is guarded at all times. It is sealed by a level-10 forcefield, and only personnel with Alpha 3 security clearance may enter. Inside are a work area for servicing and repairing phasers and a number of sealed weapon lockers. Type I and Type II phasers are held in sufficient numbers for every crew member. Type III phaser rifles and the new compression phaser rifles are also stocked, but only enough for about one third of the crew. Heavy ordnance is held in limited numbers.

Torpedo/Probe Magazine

These restricted compartments store unarmed photon torpedoes, quantum torpedoes when the mission calls for them, and science probes of types I to VI and type IX, with types VII and VIII carried when the mission requires. They also hold the parts and assembly equipment for building new photon torpedoes, and the torpedo launcher loading mechanism reaches into them. The fore and aft torpedo magazines are on Deck 2.

3.0 Tactical Systems

3.1Phasers

Array Arrangement

Two dorsal arrays on the primary hull start from the aft third of the saucer and run forward to meet on either side of the bridge. A single ventral array covers a 90 degree arc across the forward half of the primary hull.

Array Type

The Saber class was first launched with three Type IX phaser arrays. Despite the ship's small size, the fleet-wide refit gave it the Type X system, now the standard phaser emitter.

Each array fires a continuous beam, and its forced-focus emitters release the energy at close to 0.986c (about 182,520 miles per second, just short of warp one). The array cycles its frequency automatically and tries to lock onto the shield frequency and phase of a threat vehicle in order to break through.

Array Output

Each array draws its power straight from the impulse drive and the auxiliary fusion generators. A single Type X emitter can release only about 5.1 MW (megawatts), but standard firing procedure fires several emitters together, usually two, for a combined discharge of roughly 10.2 MW.

Arrays3 (2 dorsal, 1 ventral)
Original Array TypeType IX
Array Type after Fleet RefitType X
Discharge VelocityApprox. 0.986c (about 182,520 miles per second)
Single Emitter OutputApprox. 5.1 MW
Standard Firing Output (two emitters)Approx. 10.2 MW
Maximum Effective Range300,000 kilometers
Primary PurposeAssault
Secondary PurposeDefense / anti-spacecraft / anti-fighter

3.2Torpedo Launchers

Arrangement

Two fixed-focus launchers deploy photon or quantum torpedoes and science probes. The forward launcher is on Deck 3 and the aft tube on Deck 1. On the uprated Saber both are second-generation automated high-speed launchers of the kind fitted to newer, smaller designs like the Nova, Defiant and Intrepid classes. Each can fire 3 devices at once, so a full salvo is 6 torpedoes: 3 forward and 3 aft.

Type

The standard weapon is the Mark XXV photon torpedo, which can be fired in patterns (sierra and others) or launched singly. Once clear of the ship it targets independently and detonates on contact unless Tactical directs otherwise.

Payload

A Saber carries 45 finished torpedoes, plus components for building another 15 photon torpedoes on board. The standard manufacturing rate is 2 torpedoes per hour, with a maximum of 5 per hour. Quantum torpedoes are loaded as the mission requires.

Launchers2 fixed-focus (forward, Deck 3; aft, Deck 1)
Uprated Salvo3 devices per launcher; 6 torpedoes per salvo (3 forward, 3 aft)
Torpedo TypeMark XXV photon torpedo; quantum torpedoes as the mission dictates
Payload45 completed torpedoes, plus components for 15 more photon torpedoes
Manufacture Rate2 torpedoes per hour standard; 5 per hour maximum
Maximum Effective Range3,000,000 kilometers
Primary PurposeAssault
Secondary PurposeAnti-spacecraft

3.3Deflector Shields

Type

The Saber uses a symmetrical subspace graviton field, broadly the same kind of shield carried by most other starships. In combat the shield reports what type of weapon is striking it and that weapon's frequency and phase. Once the tactical officer has analysed this, the shield can be tuned to the weapon's frequency but given a different nutation, a tactic that raises shield efficiency dramatically.

Output

A Saber has eight shield generators. Each groups ten graviton polarity sources of 28 MW (megawatts) that feed a 575 millicochrane subspace field distortion amplifier. A generator delivers 280 MW of shield power, and under peak momentary loads it can briefly reach almost 98,000 MW, for 150 nanoseconds.

At Red Alert, five generators run in phase lock for a continuous output of about 1400 MW. In Cruise Mode (Condition Green) two generators must be running at all times, with a third on standby; deflector output in this mode is about 560 MW.

Shield power comes directly from the warp engines and the impulse fusion generators, and the impulse power plants can add more when required. The shields block approximately 23% of the total EM spectrum, comparable to the shields of a Galaxy-class starship.

Range

To save energy, the raised shields hug the hull at an average distance of seven meters. They can be extended to take in a nearby object, though shield strength drops as a result.

TypeSymmetrical subspace graviton field
Shield Generators8
Generator CompositionTen 28 MW graviton polarity sources feeding a 575 millicochrane subspace field distortion amplifier
Output per Generator280 MW (approaching 98,000 MW for 150 nanoseconds at peak momentary load)
Red Alert OutputApprox. 1400 MW continuous (five generators in phase lock)
Cruise Mode OutputApprox. 560 MW (two generators operating, one on standby)
EM Spectrum CoverageApprox. 23%
Average Range7 meters from the hull
Primary PurposeDefense from enemy threat forces, hazardous radiation and micrometeoroid particles
Secondary PurposeRamming threat vehicles

4.0 Computer Systems

4.1Computer Core

Number of Computer CoresTwo
Primary CoreDecks 2 and 3, starboard of the bridge module
Secondary (Emergency) CoreMirror position on the port side
TypeFFU computer cores: smaller versions of the New Orleans-class isolinear processing cores, spread over two decks instead of four
PowerSmaller, regulated EPS conduit direct from the warp core
CoolingRegenerative liquid nitrogen loop

The primary core occupies part of Decks 2 and 3 to starboard of the bridge module, and the secondary emergency core sits in the matching position to port. The FFU cores fitted to the Saber are scaled-down versions of the New Orleans class's isolinear processing cores, arranged over two decks rather than four. They draw power through a smaller, regulated EPS conduit running directly from the warp core and are cooled by a regenerative liquid nitrogen loop.

Mission demands seldom take more than 80-85% of the core's total processing and storage capacity. The remainder is kept free for intelligence-gathering, tactical or scientific missions, or to hold backup data if a core is damaged.

4.2LCARS

LCARS, short for Library Computer Access and Retrieval System, is the standard user interface of 24th-century computer systems. It combines spoken commands with graphically enhanced keyboard and display input and output. The graphical layout reshapes itself around the task in hand, keeping the system as easy to use as possible. Whenever the ship docks at a starbase or station the LCARS software is updated as needed, taking advantage of faster and more powerful processors, tightening security and correcting flaws found in earlier versions out in the field.

4.3Security Levels

Access to Starfleet data is tightly controlled. Every ship's computer cores are programmed with a standard set of access levels to keep confidential information out of the wrong hands.

Security levels are flexible and can be tied to particular tasks. Some areas of the ship are closed to unauthorized personnel whatever their level, and command personnel can raise, lower or revoke an individual's level.

The following security levels apply aboard a Saber-class starship:

Level 10Captain and above
Level 9First Officer
Level 8Commander
Level 7Lt. Commander
Level 6Lieutenant
Level 5Lt. Junior Grade
Level 4Ensign
Level 3Non-Commissioned Crew
Level 2Civilian Personnel
Level 1Open Access (Read Only)

Note: levels above a person's current rank can be, and are, granted when, where and to whom they are needed.

Before granting access, the main computer runs a set of identity checks on the user, including face and voice recognition, with a spoken code as a further safeguard.

4.4Universal Translator

Every Starfleet vessel runs a computer program called the Universal Translator, which lets people who speak different languages talk to one another. It analyses the patterns of an unknown language against a range of criteria and builds a translation matrix from the results. The Starfleet badge houses the translator, and the wearer has small receivers implanted in the ear canal.

The translation matrix aboard Saber-class starships holds well over 100,000 languages, and the number grows with every new encounter.

5.0 Propulsion Systems

5.1Warp Propulsion System

TypeCeries Industries B-Class Matter-Antimatter Reaction Assembly (M/ARA)
Normal Cruising SpeedWarp 7
Official Warp Limit (subspace pollution)Warp 5
Maximum Safe SpeedWarp 9.8 for 12 hours
Warp CoreHorizontal, Deck 2; ejectable through the stern
Warp Field Coils16 (a pair of four in each nacelle)
Antimatter StorageStandard Starfleet antimatter pods, Deck 7, aft of the warp core

The warp core lies horizontally on Deck 2 in the engineering section. Deck 2 houses the matter/antimatter reaction assembly (M/ARA) itself, while its supporting systems occupy the balcony above on Deck 1, Main Engineering. The core is made up of matter and antimatter injectors, four-lobed magnetic constriction segment columns, and a dilithium articulation frame around a central reactor of translucent aluminum and duranium. From the core on Deck 2, plasma transfer conduits run laterally out to the warp plasma injectors and the nacelles. Each nacelle includes an in-line impulse system that draws in matter, heats it inside the nacelle and expels the heated gas via a space-time driver assembly housed in the nacelle's aft cap. Anti-deuterium is held aft of the warp core on Deck 7 in a row of standard Starfleet antimatter pods.

Unlike those of most Federation ships, the Saber's warp field coils are housed just inside the main hull rather than in outboard nacelles. The nacelles are built much like the rest of the ship, but cobalt cortenide longitudinal stiffeners run the full length of each nacelle housing to resist heavy warp-induced stress, and triply redundant conduits for the Structural Integrity Field (SIF) and Inertial Damping Field (IDF) systems run all through them. Each nacelle holds a pair of four warp field coils, giving the class 16 in total.

For a ship of this size the B-grade warp reactor is exceptionally powerful, so Saber-class vessels give off a warp signature comparable to that of much larger starships. Improvements in variable warp field geometry ensure that no ship of the class does harmful damage to subspace. All standard warp engine controls and procedures apply to the Saber class.

If a warp core breach threatens, the crew can eject the main M/ARA core through the stern.

Note: thanks to advances first made in the M/ARA warp drive of the new Intrepid-class starship, vessels whose drive system is the Ceries B-Grade M/ARA are no longer bound by the maximum cruising speed limit. Under Starfleet Command Directive 12856.A, every starship will have its warp drive upgraded to prevent further pollution of subspace.

5.2Impulse Propulsion System

TypeStandard Saber-class mass drivers, developed and built by HighMPact Propulsion
OutputComparable to the New Orleans class
Number of Engines2
Single EngineJust under 0.50c
Maximum Impulse0.75c (both engines at approx. 3/4 strength)
Full Impulse0.25c (standard impulse limit)
Half Impulse0.125c
Quarter Impulse0.0625c

Either of the two impulse engines can push a Saber to just under 0.50c on its own. 'Maximum Impulse', at 0.75c, is three-quarters of the speed of light (186,282 miles per second, or warp one), and needs both engines running at about three-quarter strength. Time dilation makes such speeds impractical for routine use, so standard impulse operations are capped at 0.25c ('Full Impulse'), with 'Half Impulse' at 0.125c and '1/4 Impulse' at 0.0625c.

5.3Reaction Control System

TypeAdapted from New Orleans-class thruster packages
Thruster Groups8 (2 forward hull, 4 mid-hull, 2 aft cowling)
FuelDeuterium from the primary tank on Deck 7 and immediate-use tanks within the thruster packages
Output4.2 million newtons of exhaust per thruster quad

The Saber's reaction control thrusters are derived from the thruster packages of the New Orleans class. Eight thruster groups are fitted: two in the forward hull, four amidships and two in the aft cowling. They burn deuterium drawn from the primary tank on Deck 7 and from immediate-use tanks inside each thruster package, and every thruster quad can produce 4.2 million newtons of exhaust.

6.0 Utilities and Auxiliary Systems

6.1Navigational Deflector

The Saber's standard main deflector dish is mounted on the ventral hull across Decks 8 and 9. It is built from molybdenum/duranium mesh panels on a tritanium frame beneath the duranium-tritanium outer hull, and can be steered by hand up to five degrees off the ship's Z-axis in any direction. Shield and sensor power for the dish comes from two graviton polarity generators on Deck 10, each rated at 128 MW, which can feed a pair of 480 millicochrane subspace field distortion generators. The navigational deflector is controlled from Deck 8.

LocationVentral hull, Decks 8 and 9
ConstructionMolybdenum/duranium mesh panels over a tritanium framework
Manual Steering5 degrees in any direction off the Z-axis
Power Source2 graviton polarity generators (Deck 10), 128 MW each
Field Generators2 x 480 millicochrane subspace field distortion generators
ControlsDeck 8

6.2Tractor Beam

Type

The tractor system projects a multiphase subspace graviton beam that can handle objects directly, from submicron to macroscopic scale, at any bearing relative to the ship. Every emitter is fixed straight onto primary members of the spaceframe to reduce isopiestic subspace shearing, possible inertial imbalance and mechanical stress.

Output

At the heart of each emitter are two multiphase graviton polarity sources rated at 12 MW, which feed a pair of 475 millicochrane subspace field amplifiers. With phase accuracy held to 1.3 arc-seconds per microsecond, interference patterns can be controlled very precisely. Additional power can be drawn from the SIF through molybdenum-jacketed waveguides. While the beam is active, the subspace fields formed around it can enclose objects of up to 920 meters, reducing the local gravitational constant inside the field so that the object becomes far easier to move.

Range

Effective range depends on the payload's mass and the delta-v required. At a nominal delta-v of 15 m/sec squared, the emitters can handle a payload of nearly 650,000,000 metric tons at under 2,000 meters; the same delta-v can be applied to an object of about one metric ton at ranges of nearly 30,000 kilometers.

Beam TypeMultiphase subspace graviton beam
Emitter Sources2 multiphase 12 MW graviton polarity sources per emitter
Field Amplifiers2 x 475 millicochrane subspace field amplifiers
Phase Accuracy1.3 arc-seconds per microsecond
Auxiliary PowerSIF, via molybdenum-jacketed waveguides
Field EnvelopeObjects up to 920 meters
Maximum Payload (15 m/sec squared delta-v)Approx. 650,000,000 metric tons at under 2,000 meters
Maximum Range (15 m/sec squared delta-v)Approx. 30,000 kilometers for a one metric ton object

6.3Transporter Systems

Number of Systems4

Personnel Transporters

Number2 (Transporter Rooms 1 & 2)
Max Payload Mass800 kg (1,763 lbs)
Max Range40,000 km
Max Beam Up/Out RateApprox. 100 persons per hour per transporter

Cargo Transporters

Number1
Max Payload Mass500 metric tons; standard operation at molecular (non-lifeform) resolution
Quantum (Lifeform) Resolution Payload1 metric ton
Max Beam Up/Out Rate (Quantum Setting)Approx. 100 persons per hour per transporter

Emergency Transporters

Number1
Max Range15,000 km, send only (range depends on available power)
Max Beam Out Rate160 persons per hour per transporter

6.4Communications

Standard Communications Range42,000 - 100,000 kilometers
Standard Data Transmission Speed18.5 kiloquads per second
Subspace Communications SpeedWarp 9.9997

7.0 Science and Remote Sensing Systems

7.1Sensor Systems

The long-range and navigation sensors are mounted behind the main deflector dish, which keeps them clear of the sensor 'ghosts' and other interference caused by the dish's millicochrane static field output. Long-range sensor (LRS) controls are on Deck 8.

Lateral sensor pallets, the ship's short-range sensors, are spaced around the rim of the whole starship. Together they cover every standard scientific discipline, with particular emphasis on:

  • Astronomical phenomena
  • Planetary analysis
  • Remote life-form analysis
  • EM scanning
  • Passive neutrino scanning
  • Parametric subspace field stress (a scan for cloaked ships)
  • Thermal variances
  • Quasi-stellar material

There are sixteen sensor pallets in all, and any pallet can be swapped and recalibrated with any other on the ship.

7.2Tactical Sensors

A Saber carries eighteen independent tactical sensors. Each one automatically tracks and locks onto approaching hostile vessels and reports their bearing, aspect, distance and percentage vulnerability to the main bridge's tactical station. The sensors are about 80% efficient against ECM and work reasonably well inside particle flux nebulae, something no earlier system had been able to do.

Warp Current Sensor

This independent subspace graviton field-current scanner lets the Saber class track ships at high warp. It locks onto the eddy currents left by the target's warp field and follows them using multi-model image mapping.

7.3Science Labs

Eight science labs are located on Deck 4. Two are dedicated biology/chemistry labs that can also serve as medical labs; the other six are multi-purpose facilities reconfigured to suit each mission. For research purposes the botany department keeps a small hydroponics bay on Deck 5.

Next to Science Lab 1 is the office of the Chief Science Officer, decorated as the CSO likes and equipped with a washroom/head, a computer display, a personal viewscreen and a work area.

Science Labs8, on Deck 4
Biology/Chemistry Labs2 (usable as medical labs)
Multi-purpose Labs6
Hydroponics BayDeck 5, maintained by the botany department

7.4Probes

The Saber's probe load depends on its mission orders. Classes I to VI and Class IX are standard on every Saber, and Classes VII and VIII are taken aboard when the mission requires them. The nine standard classes are as follows.

7.4.1 Class I Sensor Probe

Range2 x 10^5 kilometers
Delta-v Limit0.5c
PowerplantVectored deuterium microfusion propulsion
SensorsFull EM/subspace and interstellar chemistry pallet for in-space use
Telemetry12,500 channels at 12 megawatts

7.4.2 Class II Sensor Probe

Range4 x 10^5 kilometers
Delta-v Limit0.65c
PowerplantVectored deuterium microfusion propulsion, extended deuterium fuel supply
SensorsClass I instrumentation plus enhanced long-range particle and field detectors and imaging system
Telemetry15,650 channels at 20 megawatts

7.4.3 Class III Planetary Probe

Range1.2 x 10^6 kilometers
Delta-v Limit0.65c
PowerplantVectored deuterium microfusion propulsion
SensorsTerrestrial and gas giant sensor pallet with material sample and return capability; onboard chemical analysis submodule
Telemetry13,250 channels at ~15 megawatts
Additional DataLimited SIF hull reinforcement. Handles the full range of terrestrial missions from soft landing to subsurface penetration; survives gas giant atmosphere missions to 450 bar pressure. Limited terrestrial loiter time.

7.4.4 Class IV Stellar Encounter Probe

Range3.5 x 10^6 kilometers
Delta-v Limit0.6c
PowerplantVectored deuterium microfusion propulsion supplemented with continuum driver coil and extended deuterium supply
SensorsTriply redundant stellar fields and particle detectors, stellar atmosphere analysis suite
Telemetry9,780 channels at 65 megawatts
Additional DataSix ejectable/survivable radiation flux subprobes. Can also be deployed against nonstellar energy phenomena.

7.4.5 Class V Medium-Range Reconnaissance Probe

Range4.3 x 10^10 kilometers
Delta-v LimitWarp 2
PowerplantDual-mode matter/antimatter engine; extended duration sublight plus limited duration at warp
SensorsExtended passive data-gathering and recording systems; full autonomous mission execution and return system
Telemetry6,320 channels at 2.5 megawatts
Additional DataPlanetary atmosphere entry and soft landing capability. Low observability coatings and hull materials. Can be adapted for tactical use by adding a custom sensor countermeasure package.

7.4.6 Class VI Comm Relay/Emergency Beacon

Range4.3 x 10^10 kilometers
Delta-v Limit0.8c
PowerplantMicrofusion engine with high-output MHD power tap
SensorsStandard pallet
Telemetry/Comm9,270 channel RF and subspace transceiver operating at 350 megawatts peak radiated power; 360 degree omni antenna coverage; 0.0001 arc-second high-gain antenna pointing resolution
Additional DataExtended deuterium supply for transceiver power generation and planetary orbit plane changes

7.4.7 Class VII Remote Culture Study Probe

Range4.5 x 10^8 kilometers
Delta-v LimitWarp 1.5
PowerplantDual-mode matter/antimatter engine
SensorsPassive data gathering system plus subspace transceiver
Telemetry1,050 channels at 0.5 megawatts
Additional DataSuitable for civilizations up to technology level III. Low observability coatings and hull materials. Maximum loiter time 3.5 months. Low-impact molecular destruct package linked to antitamper detectors.

7.4.8 Class VIII Medium-Range Multimission Warp Probe

Range1.2 x 10^2 light-years
Delta-v LimitWarp 9
PowerplantMatter/antimatter warp field sustainer engine; duration of 6.5 hours at warp 9; MHD power supply tap for sensors and subspace transceiver
SensorsStandard pallet plus mission-specific modules
Telemetry4,550 channels at 300 megawatts
Additional DataUses range from galactic particles and fields research to early-warning reconnaissance missions

7.4.9 Class IX Long-Range Multimission Warp Probe

Range7.6 x 10^2 light-years
Delta-v LimitWarp 9
PowerplantMatter/antimatter warp field sustainer engine; duration of 12 hours at warp 9; extended fuel supply for a warp 8 maximum flight duration of 14 days
SensorsStandard pallet plus mission-specific modules
Telemetry6,500 channels at 230 megawatts
Additional DataLimited payload capacity; isolinear memory storage of 3,400 kiloquads; fifty-channel transponder echo. Typically used as an emergency-log/message capsule on a homing trajectory to the nearest starbase or known Starfleet vessel position.

8.0 Crew Support Systems

8.1Medical Systems

Sickbay

Sickbay is on Deck 4, close to the science labs. It is not large, but it holds an isolation room, a morgue/stasis unit, a 2-bed intensive care ward and a 5-bed treatment room. Its limited surgical facility exists mainly to stabilize patients until they reach a proper medical facility. Next door are a dental care office and a small medical laboratory.

Chief Medical Officer's Office

The CMO's office adjoins sickbay, with one door to the corridor and another straight into sickbay. It is decorated as the Chief Medical Officer prefers and has a washroom/head, a computer display and a personal viewscreen.

Mass Casualties

When mass casualties require more medical space, the Cargo Bay is the first choice and the shuttlebays the second. The lounge can become a treatment ward, and the VIP quarters can be adapted to provide extra intensive care units.

8.2Counseling Services

The Ship's Counselor works from an office near the medical section on Deck 4. The private office is furnished to standard, decorated as the Counselor prefers, and has a washroom/head, a computer display and a personal viewscreen. Beside it are an individual therapy room with chairs and a couch for one-to-one sessions and a large group therapy room furnished with several couches and chairs.

A crew member who suffers a psychotic episode and has to be kept apart from the crew is held in sickbay, in either the isolation unit or an intensive care unit, depending on which beds are free.

8.3Crew Quarters Systems

General Overview

Officers' quarters and VIP/guest accommodation are on Deck 2; enlisted crew quarters and the diplomatic facilities are on Deck 3.

Anyone posted to a Starfleet vessel for more than six months may reconfigure their quarters within limits of hardware, volume and mass. Those on shorter assignments normally keep the standard layout.

Crew Quarters

Every crew member is given standard living quarters. Space aboard is tight, so only senior officers may bring their families on a Saber-class posting. Quarters for non-commissioned officers (NCOs) and enlisted crew are on Deck 3.

NCOs are housed two to a suite. Each suite has two bedrooms with standard beds on either side of a shared living and work space; every bedroom has its own washroom fitted with an ultrasonic shower, and the shared space holds a personal viewscreen and two computer displays. NCOs may not keep pets.

Enlisted crew share quarters with up to 4 others. Their quarters follow the NCO pattern of two bedrooms, each with its own ultrasonic-shower washroom, opening onto a common living and work space with a personal viewscreen and two computer displays, but the bedrooms are furnished with twin beds. Enlisted crew may not keep pets.

Officers' Quarters

Ensigns share a suite laid out like an NCO suite, with two bedrooms with standard beds, an ultrasonic-shower washroom for each bedroom, and a common living and work space holding a personal viewscreen and two computer displays. Unlike NCOs, ensigns may keep pets.

Officers from Lieutenant JG to Commander have quarters to themselves. Senior officers may be accompanied by their families, and officers with children are given quarters with viewports.

A single officer's quarters usually provide a living and work space, a bedroom with a standard bed, a small ultrasonic-shower bathroom, a personal viewscreen, a computer display and provision for pets. Family quarters are furnished the same way but have 2 or 3 bedrooms, and 2 bathrooms, each with an ultrasonic shower.

Officers may ask for their quarters to be joined into one larger dwelling.

Executive Quarters

The Captain and the Executive Officer have special quarters on Deck 2. Only the VIP/Diplomatic Guest quarters are more luxurious, and both are larger than standard officers' quarters. They normally offer a bedroom with an especially comfortable bed, a living and work space, a computer display, a personal holographic viewer, a food replicator, provision for pets, and a bathroom with both an ultrasonic shower and an old-style water shower.

VIP/Diplomatic Guest Quarters

The Saber class stands for the authority of the UFP and serves as an instrument in its dealings with other species. Starfleet means to use it in diplomatic situations, where it will be called on to carry or house Very Important Persons, diplomats or ambassadors.

The VIP quarters are on Deck 2. Each has a bedroom whose bed is a null-grav sleeping chamber, a generous living and work space, a personal holographic viewer, a food replicator, provision for pets, and both an ultrasonic shower and a bathtub/water shower. Class H, K, L, N and N2 environments can be set up in them at once.

8.4Recreational Systems

General Overview

The Saber is a small starship whose design is given over largely to scientific and tactical use. Starfleet recognizes, though, that the strain of working at 99% efficiency on a vessel designed for exploration and extended field operations can become dangerous, so a few recreational facilities are provided.

Holosuites

The holosuites are scaled-down versions of the standard Federation holodeck, intended for individual use. They can do anything a full holodeck can, but handle fewer variables and render less detail. There are two holosuites, both on Deck 5.

Phaser Range

For some officers and crew, the best way to work off frustration is from behind a phaser rifle. The phaser range on Deck 5 is heavily shielded with armored walls; it is designed for low-power fire but can withstand brief blasts at setting 16 without trouble.

Recreational shooting and practice normally use a Type II phaser at level 3 (heavy stun). The shooter stands at the centre of the darkened room, lit only by a circle on the floor around them, and fires at coloured dots about the size of a human hand that sweep across the walls. At the end of each round the computer announces the number of hits and misses and the accuracy percentage.

Gymnasium

Some personnel find relief from the pressures of daily life in physical exercise. The Security department encourages regular use of the gymnasium, and tournaments and competitions are held there often.

The gymnasium is on Deck 5, close to the holosuites and the lounge. Its weight room has a full range of body-building and exercise equipment, and any form of exercise can be practised, whether Terran, Klingon, Vulcan (letting the body waste away would hardly be logical), Bajoran, Trill or another tradition.

The weight room also has a wrestling mat for wrestling, martial arts, kickboxing and any other kind of unarmed combat. For anyone without a willing opponent, holo-diodes in the walls and ceiling can project a holographic sparring partner trained in whichever combat discipline the user selects. The computer records each user's attack and defence patterns, learns their fighting style and adapts in order to beat them. Every six months each crew member must pass a complete test of physical fitness and hand-to-hand combat.

Along one wall, weapon lockers hold a selection of hand-to-hand combat weapons for training. The security division recommends that Starfleet personnel learn ancient weapons, since phasers may not be available in every situation, and non-energy weapons of Terran, Klingon, Betazoid, Vulcan, Bajoran and other origins are provided.

Hydroponics Bay

Now and then a person needs to walk among living plants and stop to smell the roses. The hydroponics bay on Deck 4 is run by the botany department and used for plant research. Crew members may stroll through the small 'hanging garden', where winding paths through the dense plant life offer some privacy. 'Natural' lighting follows a day/night cycle chosen to benefit the plants.

8.5The Mess Hall

Saber-class ships go without many of the comforts found on larger vessels. Food replicators are not fitted in crew quarters; the only ones outside the Mess Hall are in the VIP quarters, the Observation Lounge, the Captain's Ready Room and the CO's and XO's quarters. Meals are therefore taken in the Mess Hall on Deck 3. Its replicators offer a vast menu of food and drink for adventurous diners, and the crew can create their own variations and save them to files for easy recall and swapping.

Three open dispenser slots for the replicators are set into the head of the room, with a counter beneath them for trays, mugs and cutlery. Diners sit at metal tables, each roughly one meter square with four stools fixed to its legs, set out in a semicircle across the room's wider end.

The mess hall also serves as an improvised meeting space for mission profiles and crew briefings, and a tall screen panel mounted on one wall can show tactical graphics as a visual aid.

The captain's mess is on Deck 2 and seats about eight people comfortably.

8.6Observation Lounge

The Observation Lounge is a small space on Deck 5, set into the forward edge of the primary hull. Its atmosphere is relaxed and friendly, and it is the one place aboard where rank counts for nothing: junior personnel need not say 'sir' to an officer, everyone meets as an equal, and opinions can be voiced without risk. It is the social hub of the ship.

The lounge keeps a small selection of games and assorted odds and ends, 3-D chess among them. A self-service bar, stocked at the Captain's discretion, holds a range of strong alcoholic drinks such as chech'tluth, Aldebaran whiskey, Saurian brandy, Tzartak aperitif, Tamarian Frost, C&E Warp Lager, Warnog and Antarean brandy, among many others, and a small food/drink replicator produces synthahol versions of these and other beverages.

The crew often give the lounge a name and decorate it themselves, usually around some kind of theme. A few tables and chairs and some benches provide seating. Large windows in the forward wall give a spectacular view from the bow of whatever lies ahead, and because they sit below the forward torpedo tubes they also offer a front-row view of torpedo launches.

9.0 Auxiliary Spacecraft Systems

9.1Flight Bay

The two shuttle bays are in the aft part of the ship and are reached along a flight path between the nacelles. They have facilities for refuelling, rearming, repairing and routinely servicing the ship's assigned shuttles. A flight control room called 'Flight Ops' runs the bays and sets the approach and departure vectors of incoming and outgoing craft. It is built into Shuttle Bay 1's forward wall, beside the turbolift exit on Deck 4.

Shuttle Bay 2, on Deck 5, is the larger of the two and houses the shuttle maintenance facilities.

Beside the Flight Ops center is the Flight Control Officer's office, decorated as the FCO prefers and equipped with a washroom/head, a computer display, a personal viewscreen and a work area.

Standard Shuttle Bays (FF)

  • Two Type-18 Shuttlepods
  • Two Type-6 Shuttlecraft
  • Two Worker Bees
  • Ordnance and Fuel
  • Flight Ops

Uprated Shuttle Bays (FFU)

  • Two Type-8 Shuttlecraft
  • One Type-10 Shuttlecraft
  • Two Type-18 Shuttlepods
  • Two Worker Bees
  • Ordnance and Fuel
  • Flight Ops

9.2Shuttlecraft

9.2.1 Type-18 Shuttlepod

TypeMedium short-range sublight shuttle
AccommodationTwo; pilot and system manager
Power PlantTwo 800 millicochrane impulse driver engines, four RCS thrusters, four sarium krellide storage cells
DimensionsLength 4.5 m; beam 3.1 m; height 1.8 m
Mass1.12 metric tons
PerformanceMaximum delta-v 16,750 m/sec
ArmamentThree Type-V phaser emitters

The Type-18 Shuttlepod dates from the mid-2360s and breaks somewhat with the usual layout of craft its size. With the risk of conflict growing with several powers on or near the Federation's borders, it was designed for more demanding work that still falls within a shuttlepod's short-range role. It was built to keep operating in combat even while its parent ship is under attack, and can double as an escape craft if necessary. Having no warp core, it is a poor choice for journeys of more than a few million kilometers. Pods of this type are in limited service aboard a number of defensive and border patrol classes, among them the Steamrunner, Saber and Defiant classes.

9.2.2 Type-6 Personnel Shuttle (Uprated)

TypeLight short-range warp shuttle
AccommodationTwo flight crew, six passengers
Power PlantOne 50 cochrane warp engine, two 750 millicochrane impulse engines, four RCS thrusters
DimensionsLength 6.0 m; beam 4.4 m; height 2.7 m
Mass3.38 metric tons
PerformanceSustained Warp 3
ArmamentTwo Type-IV phaser emitters

The Type-6 is in widespread service across Starfleet and is only now giving way to the Type-8, a slightly newer craft of similar design. The uprated version is regarded as the ideal choice for short interplanetary hops, and its generous size lets it carry both personnel and cargo over such distances. An onboard short-range transporter makes it easy to beam cargo and crew to and from a destination, and atmospheric flight capability lets the shuttle land on planetary surfaces. Craft of this type serve aboard almost every medium and large starship class, as well as on stations and Starbases.

The Type-6 may be the most successful shuttle design yet, and its basic structure and components underpin the Type-8, -9 and -10 spaceframes.

Major technical advances in the 2370s brought further upgrades to shuttle engine systems. They make the craft better suited to long-range flight and, like the starships that carry it, it no longer damages subspace.

9.2.3 Type-8 Personnel Shuttle

TypeLight long-range warp shuttle
AccommodationTwo flight crew, six passengers
Power PlantOne 150 cochrane warp engine, two 750 millicochrane impulse engines, four RCS thrusters
DimensionsLength 6.2 m; beam 4.5 m; height 2.8 m
Mass3.47 metric tons
PerformanceWarp 4
ArmamentTwo Type-V phaser emitters

Built on the Type-6 frame, the Type-8 is the most capable of its successors among personnel shuttles. It is only slightly larger than its predecessor, carries a medium-range transporter and can fly within a planet's atmosphere. A large cargo area, which can also seat six passengers, makes it a capable transport. As it gradually takes over from the older craft, the Type-8 is being deployed rapidly to all medium and large starships and to Starbases and stations across the Federation.

9.2.4 Type-10 Personnel Shuttle

TypeHeavy long-range warp shuttle
AccommodationTwo flight crew, two passengers
Power PlantOne 250 cochrane warp engine, two 800 millicochrane impulse engines, four RCS thrusters
DimensionsLength 9.64 m; beam 5.82 m; height 3.35 m
Mass19.73 metric tons
PerformanceWarp 5
ArmamentThree Type-V phaser emitters, two micro-torpedo launchers, jamming devices

Designed expressly for the Defiant-class starship project, Starfleet's Type-10 Personnel Shuttle marks the service's sharpest break in a century with the traditional role of auxiliary craft. Short of a dedicated fighter, it is among the most powerful auxiliary craft in service; only the bulkier Type-11 is more heavily equipped. It has reinforced hull armor, micro-torpedo launchers and a suite of tactical jamming devices, and its larger warp coil assembly and torpedo stores make it much heavier than other shuttles. Features carried over from the Defiant-class project include armored bussard collectors and a complex plasma venting system for use if a warp core breach threatens. A powerful navigation deflector allows this bulky craft to travel at high warp, and its sophisticated sensor suite suits it to reconnaissance. Able to look after itself in combat, the Type-10 is in limited service aboard Defiant-class starships, border patrol vessels and combat-ready ships.

9.2.5 Work Bee

TypeUtility craft
AccommodationOne operator
Power PlantOne microfusion reactor, four RCS thrusters
DimensionsLength 4.11 m; beam 1.92 m; height 1.90 m
Mass1.68 metric tons
PerformanceMaximum delta-v 4,000 m/sec
ArmamentNone

The Work Bee is a capable independent craft used to inspect spaceborne hardware and for repairs, assembly and other jobs that call for remote manipulators. The fully pressurized design has changed little in 150 years, though its internal systems are updated routinely. Onboard fuel cells and microfusion generators keep it running for 76.4 hours, and its life-support systems can supply the pilot with breathable air, drinking water and cooling for up to fifteen hours. An operator wearing a pressure suit or SEWG can leave the craft during operations; the forward window lifts vertically to let the pilot in and out.

Two robotic manipulator arms fold away beneath the main housing and are worked from the pilot's controls. The Work Bee can also take a cargo attachment, which makes it ideal for moving cargo around large Starbases and spaceborne construction facilities; the attachment carries its own additional microfusion engines to cope with the extra mass.

10.0 Saber Class Flight Operations

10.1Mission Types

Operational Categories

Every operation aboard a Saber-class starship belongs to one of four categories, defined below.

Flight OperationsEverything involved in running the ship as a vessel: power generation, upkeep, environmental systems and any other system maintained and used to keep her spaceworthy.
Primary Mission OperationsWork tasked and controlled by the Main Bridge, usually needing complete authority over navigation and the ship's resources.
Secondary Mission OperationsActivities outside the Main Bridge's direct control that do not affect primary mission operations, such as long-range cultural, diplomatic or scientific programmes conducted by semi-autonomous or independent groups on board.
Flight Deck OperationsNormally a form of secondary mission operations, but controlled by the Tactical Information Center. They quite often take precedence over primary mission operations, particularly on combat missions.

Mission Types

Saber-class ships are classed as mission-oriented vessels. A Saber can be sent on any mission that needs doing, but to work at full efficiency it should be the right variant for the task it is given.

Like most Starfleet vessels, the Saber uses modular technology. Its systems are so compact and closely interwoven, however, that converting a Saber to a different variant when its mission parameters change takes considerable time, typically weeks to months. Every Saber belongs to one of four variant types and concentrates on the missions that type was designed for.

The mission types, and the variants usually assigned to each, are:

  1. Federation Policy and Diplomacy: the FF/FFU-D, a Diplomatic Courier. Its chief task is carrying diplomatic personnel to their destinations, hosting low-level conferences, summits and treaty talks, and transporting vital cargo of a political nature. Scientific and weapon capacity is reduced to make room for extra VIP quarters, private offices, meeting halls, conference rooms, secure communications equipment and expanded entertainment facilities.
  2. Deep-space Exploration / Contact with Alien Lifeforms: the FF/FFU-E, a Scout ship. This is the baseline variant described throughout this manual, tasked with exploration, observation and data gathering, first contact, and scientific and patrol missions.
  3. Ongoing Scientific Investigation: the FF/FFU-S, a Science ship, which serves mainly as a base of operations for collecting scientific data. Weapon load-outs are reduced and diplomatic facilities are almost absent, freeing space for more science labs, more probes and mission-specific experiments and equipment.
  4. Tactical/Defensive Operations: the FF/FFU-P, a Patrol ship, whose main tasks are guarding borders and patrolling shipping lanes. Scientific and diplomatic facilities are reduced to make room for more torpedo storage, extra shield generators, a larger security contingent, and better tactical sensors and communications equipment.
  5. Emergency/Search and Rescue: any variant may be summoned to help in an emergency. Typical tasks include responding to standard Federation emergency beacons, extracting Federation or non-Federation citizens in distress, recovering Federation or non-Federation spacecraft in distress, and small-scale evacuation of stations or outposts. Planetary evacuation is not feasible.

10.2Operating Modes

Normal flight and mission operations aboard a Saber-class starship follow a range of Starfleet standard operating rules, set by the ship's current operational state. The Commanding Officer decides that state, although in certain defined cases the computer will raise the ship to a higher alert status by itself.

The major operating modes are:

Cruise ModeThe ship's normal operating condition.
Yellow AlertA ship-wide state of heightened readiness for a possible crisis.
Red AlertA genuine emergency: the ship or crew is in danger, an emergency is imminent, or combat is under way.
External Support ModeReduced activity while the ship is berthed at a starbase or other support installation.
Reduced Power ModeInvoked after a major failure of power generation, during a critical fuel shortage, or when a tactical situation calls for severe cuts in onboard power generation.

In Cruise Mode the ship runs on three 8-hour shifts named Alpha, Beta and Gamma. If a crisis develops, it may change to four 6-hour shifts to keep crew fatigue down. Shift command is normally assigned as follows:

Alpha ShiftCaptain (CO)
Beta ShiftExecutive Officer (XO)
Gamma ShiftSecond Officer

10.3Separated Flight Mode

The Saber's unusual hull shape rules out a separated flight mode. The hull can jettison the warp nacelle assembly quickly, but with no clearly defined saucer section the primary hull cannot fly independently.

10.4Landing Mode

Because of its unusual hull shape, the Saber class cannot set down inside a gravity well and still keep enough hull integrity for transatmospheric operations. That does not mean the hull cannot survive a landing. On the contrary, in an extreme emergency a Saber could make a surface landing at an estimated cost of 45% of its hull integrity, with failure rates among structural members estimated at up to 75%. The ship would no longer be fit for deep-space operations, but enough internal volume and structure should survive for the landing to be safe for the crew.

10.5Maintenance

However automated a modern starship may be, its systems still need regular servicing and upgrades. Maintenance is normally Engineering's job, though personnel from divisions that know particular systems better can look after those systems themselves.

Maintenance aboard is almost continuous and ranges widely in scale, from coaxing a stubborn replicator back into service to realigning the dilithium matrix, all handled routinely by technicians and engineers. Not every system is checked centrally from Main Engineering, since routing every process to one location would take up too much computer time. Instead, systems are grouped by deck and location for checking, and each department head is expected to run regular diagnostics on the department's own equipment and pass any anomalies to Engineering for repair.

Systems Diagnostics

All key systems and subsystems carry built-in diagnostic programs and procedures to be run whenever a fault occurs or is suspected. They fall into five levels, distinguished by how much of the automated testing is checked by the crew. Which level is used depends mainly on how critical the situation is and how much time is available for testing.

Level 1 DiagnosticThe most comprehensive system diagnostic normally run on ship's systems. Extensive automated routines are backed by a team of crew members who physically check the operation of system mechanisms and the system readings instead of trusting the automated programs, guarding against faults in self-testing hardware and software. On major systems a Level 1 can take several hours, and the system often has to be taken off-line for the full set of tests.
Level 2 DiagnosticAlso comprehensive and heavily automated like Level 1, but the crew checks fewer operational elements. The result is slightly less dependable, but the test takes under half as long as a Level 1.
Level 3 DiagnosticSimilar to Levels 1 and 2, but crew verification covers only key mechanisms and system readings. Intended to be completed in ten minutes or less.
Level 4 DiagnosticAn automated procedure for use whenever trouble with a system is suspected. Similar to Level 5 but with more sophisticated batteries of automated tests. For most systems it takes less than 30 seconds.
Level 5 DiagnosticAn automated procedure for routine verification of system performance. Usually taking less than 2.5 seconds, it is run on most systems at least daily, and also during crises when time and system resources are tightly managed.

11.0 Emergency Operations

11.1Emergency Medical Operations

Starfleet General Policy and Starfleet Medical Emergency Operations require that no less than 40% of the Saber's officers and crew be cross-trained as triage specialists, Emergency Medical Technicians/Medics or in other emergency medical roles, on top of non-medical emergency duties in the engineering or tactical departments. The policy reflects the enormous variety of emergencies, medical and otherwise, that a Federation starship may be called to on any mission.

With maximum engineering support, the Deck 5 lounge can be brought online as a treatment ward and the Deck 2 VIP/guest quarters as emergency intensive care wards in an estimated 30 minutes. Shuttle Bay 1 also holds a mobile hospital, which can be set up on the flight deck or moved to the Cargo Bay as an emergency overflow triage center. In an emergency the Cargo Bay's atmosphere can be recalibrated to a type H, K or L environment for non-humanoid casualties. Every facility has full biohazard suites to prevent, or at least minimise, the crew's exposure to diseases that could prove fatal.

11.2Lifeboats

There is always a chance that a ship will be disabled or damaged so badly that it can no longer sustain life. The crew then has the option of abandoning ship in the escape pods. A Saber-class starship carries 56 escape pods, each holding 5 people. Each pod can keep its occupants alive for 90 days in space and reach a top speed of 4,200 m/sec. Once a pod leaves the ship its subspace radio and beacon switch on permanently to help rescuers find it, and the pods are capable of atmospheric entry and landing.

No escape pods are attached to the bridge; they are located on all decks below Deck 2. Two pods are reserved for the four senior officers in the chain of command, who are the last to leave. As experienced Captains have become scarce in Starfleet, the custom of a Captain going down with the ship has been abolished. When the ship is abandoned, these four officers wait until all other personnel have gone, arm the auto-destruct if needed, and finally depart in the two pods set aside for them.

Number Carried56
Capacity5 persons each
Dimensions4.8 meters tall; 5.9 meters long
Life Support90 days in space; longer when linked together in 'Gaggle Mode'
Maximum Speed4,200 m/sec
EquipmentSubspace radio and beacon, permanently active once ejected; atmospheric entry and landing capability
Reserved Pods2, for the four senior officers in the chain of command

11.3Rescue and Evac Operations

A Saber-class starship may face two kinds of rescue and evacuation operation: abandoning the Saber itself, or taking people off a planetary body or another starship.

Rescue Scenarios

When people are being evacuated onto the ship, the following resources are available:

  • Personnel and cargo transporters able to bring 300 persons per hour aboard.
  • The 2 Type 6 shuttlecraft, kept ready on hot standby to launch at once, with the rest of the shuttlecraft able to follow at an hour's notice. Capacity differs between craft types, but on average 100 persons per hour can be lifted to a standard orbit from an M-Class planetary surface.
  • Room for up to 500 evacuees once the Flight Decks and Cargo Bay are converted to emergency living quarters.
  • Emergency triage and medical centers can be set up in the VIP quarters, the Lounge and the Cargo Bay.
  • The Cargo Bay can be temporarily switched to a type H, K or L environment for non-humanoid casualties.

Abandon-Ship Scenarios

When the Saber itself is being abandoned, the following resources are available:

  • Personnel, cargo and emergency transporters able to move 460 persons per hour off the ship.
  • The 2 Type 6 shuttlecraft, kept ready on hot standby to launch at once, with the rest of the shuttlecraft able to follow at an hour's notice. Capacity differs between craft types, but on average 100 persons per hour can be carried from a standard orbit down to an M Class planetary surface.
  • Lifeboats: each Saber carries 56 of the 5-person type, 4.8 meters tall and 5.9 meters long, with a top speed of 4,200 m/sec and life support for 90 days in space, or longer when linked together in 'Gaggle Mode'.
  • Environmental suits for evacuation directly into vacuum. Personnel can leave via the airlocks, the flight bay or the exterior turbolift couplings. Suits are stocked at every exterior egress point, and survival lockers are placed throughout the habitable parts of the ship.
  • Removable exterior windows. Many windows can be released for egress, but their manual releases are enabled only on loss of atmosphere or power or in certain Red Alert conditions, and then only if everyone in the neighbouring compartments can reach an environmental suit.

Appendix A — Variant Designations

FFFast Frigate
FFUFast Frigate (Uprated)

Suffixes

DDiplomatic
EScout
SScience
PPatrol/Escort

Appendix B — Basic Technical Specifications

Accommodation

Officers and Crew60
Evacuation Limit500

Dimensions

Overall Length190 meters
Overall Draft48.60 meters
Overall Beam193.19 meters

Performance

Maximum VelocityWarp 9.8 (12 hours maximum)

Armament

Standard (FF)3 Type IX phaser arrays, 1 forward torpedo launcher (2 tube), 1 aft torpedo launcher (2 tube)
Uprated (FFU-E, -P)3 Type X phaser arrays, 1 forward torpedo launcher (3 tube), 1 aft torpedo launcher (3 tube)
Uprated (FFU-D, -S)3 Type X phaser arrays, 1 forward torpedo launcher (2 tube), 1 aft torpedo launcher (2 tube)

Transport Equipment

Shuttlecraft (FF):

  • 2 Work Bees
  • 2 Type-6 Personnel Shuttlecraft
  • 4 Type-18 Shuttlepods

Shuttlecraft (FFU):

  • 2 Work Bees
  • 2 Type-6 Personnel Shuttlecraft
  • 1 Type-10 Shuttlecraft
  • 4 Type-18 Shuttlepods

Transporters:

  • 2 Personnel
  • 1 Cargo
  • 1 Emergency

Structure and technical figures based on the Saber-class technical specifications of Star Trek: A Call to Duty (techspecs.acalltoduty.com, 2001). Text rewritten for Snow Leopard Gaming.